EnCore® Combined Materials / Mechanically-Bonded Fiber
MBF-G is a high-temperature gasket material combining an inorganic fiber, low binder facing material with an 0.2mm (0.008”) tang perforated tin-plated steel core. This material provides excellent value for exhaust manifold and header gaskets, downpipe and collector gaskets, EGR, muffler, and other exhaust gas applications in automotive and small engines. MBF-G is available in several gauges, with roll widths up to 305mm (12”) wide. The following typical values were established using an overall construction thickness of 1.6mm (0.063”).
|Compressibility, % (at 34.5MPa)||25-30||ASTM F 36|
|Recovery, %||20-30||ASTM F 36|
|Tensile Strength, AMD, MPa(psi)||29 (4250)||ASTM F 152|
|Weight Loss on Ignition, % (at 815°C)||0-10||ASTM F 495|
|Fluid Resistance, IRM903 Oil||ASTM F 146|
|Change in Thickness, %||2-5|
|Change in Weight, %||20-30|
|Fluid Resistance, Fuel B||ASTM F 146|
|Change in Thickness, %||2-4|
|Change in Weight, %||15-25|
Remarks and Related Documents:
Specification values determined by the test methods required for ASTM F-104, Type 3 materials.
ISO 9001: 2015 Registered
To see the full PDF and print it please click on the link below.View/Print PDF